*****************************************
		* DRIVER VERSION  2.2.4.71              *
		* UTILITY VERSION 1.29.1   FOR KLG-530  *
		*****************************************	October 2004


What's new in this revision?
--------------------------------------------------------------
 -> introduces Extended Range (XR) technology



Instructions
--------------------------------------------------------------
 -> Unzip "KLG-530_drv22471_utl1291.zip" to a known folder on your machine: 
    one item to extract: "Setup.exe" 

 -> Uninstal the adapter: 
	STEP 1: WITH THE CARD STILL PHYSICALLY PRESENT, go to "Device Manager" 
	(right-click "My Computer" -> Properties -> Hardware -> Device Manager),
	select "KLG-530" 
	(it should feature under "Network Adapters"), 
	right-click and select "Uninstal". Click OK to confirm removal. 
	STEP 2: go to "Control Panel" 
	(Start Menu -> Control Panel), double-click "Add/Remove" program. 		
	Select "KLG-530 Wireless Network Adapter", click "Change/Remove". 
	Click OK to confirm uninstal. 
	Select "Restart computer later" when prompted. 
	STEP 3: TURN COMPUTER OFF / REMOVE adapter
	You are now ready to start again from scratch. 

 -> Turn machine back on
    Run "Setup.exe" WITHOUT THE ADAPTER PHYSICALLY PRESENT

 -> When installation is complete, shut down your machine, physically insert
 the adapter, and turn machine back on

 -> Wizard will then complete the process (select "automatic" option when prompted).


Note: the InstallShield wizard may take a moment to complete, during which nothing happens
 on screen: please DO NOT TAKE ANY ACTION until you see the screen featuring the "FINISH" button.